Precautions for centrifugal oil filter

Working principle of centrifugal oil filter

Through the centrifugal force of high-speed rotating drum, the residue oil are separated to achieve liquid-solid separation. When the drum stops rotating, the clean oil will slide out of the drum to achieve the purpose of filtering. The oil is pure. But at that time, we can do experiments on the fire, fry fried dough sticks, fry vegetables, do foam overflow the pot.

In the past, the filtration equipment we have used, such as plate frame filtration, vacuum filtration air pressure filtration, are called medium filtration (media refers to filter cloth filter screen). Due to the different mesh size of media filter cloth, the large residue is filtered out during the filtration process, the fine particles flow into the oil through the mesh. This is the effect of these filtering equipment in the past, which is to solve the oil quality problem relatively In terms of operation, after the oil colloid inside the crude oil blocks the mesh, it is necessary to repeatedly open replace the filter cloth, clean the filter cloth the later consumption parts.

It is the result of high-speed separation of mass to weight ratio, it is the equipment to completely solve the problem of oil quality.

1. The filtration speed is fast. The oil is filtered every 3-4 minutes, the amount of oil filtered is 15-20kg. The oil residue is cleaned every 1000kg. The operation is convenient.

2. Compared with other equipment, long-term use does need any consumable parts, no filter cloth cleaning consumption.

3. Power saving, start the power supply, cut off the power supply after adding crude oil, filter the oil quality by using the centrifugal force generated by the drum, the clean oil will flow out after the drum is stationary.

4. The use effect is better than any other filtering equipment, such as the trouble of replacing the filter cloth the consumption of the filter cloth, the danger of overpressure explosion of air pressure filtration the defect of low efficiency of repeated opening due to excessive oil sludge. The centrifugal filter has no consumption parts to purchase, saves power time, has good effect, high purity of oil clear color, can be directly canned for sale eaten directly.

5. Design Description: Although the equipment is small, it has high technology content. The first is the balance force of the drum when it rotates at high speed, With a slight deviation, even if it is only one millimeter, the high-speed rotating drum is like a vibrator. In addition, the liquid is polarized with vibration, which makes the liquid-solid resonance. Although it is protected danger by the external protection, it will also cause a large number of internal organs to be damaged, many peers give up the terminal halfway. The scientific technical personnel of our factory have been committed to this research for several years, repeated experiments, overcome various difficulties, using the cylinder molding, after the internal external fine grinding vibration. The centrifugal force is balanced by the centripetal force of axial movement, so that the problem of high-speed rotating balance of the drum is solved. The machine runs stably has high safety performance. The fine sealing device is used to make the connecting parts of the rotating body the motor impervious to oil oil leakage. The centrifugal oil filter adopts the safety protection device, so that the rotating body will be separated the motor when it rotates at high speed. The thoughtful meticulous design makes the machine run smoothly, with high safety performance better filtering effect than other similar products. The oil filter can be said to be the end product of oil filtering equipment.

Precautions for centrifugal oil filter

Precautions for using edible oil filter

1. Do reverse.

2. The crude oil should be added with brine, hydrated then filtered.

3. Do disassemble pry the machine at will.

4. There are oil filling holes on the side wall of the oil inlet bucket. Fill edible oil 2-3 times a day to prevent dry grinding of bearings.

The design of suspended centrifugal oil filter shows: Although the equipment is small, it has high technology content. One is the balance force of the drum when it rotates at high speed. If there is a deviation, even if it is only one millimeter, the high-speed rotating drum is like a vibrator. In addition, the liquid is polarized with the vibration, which makes the liquid-solid co vibration. Although the protection of the outer body will cause danger, it will also cause a lot of damage to the internal organs. Many colleagues give up the terminal by half. Boyue Equipment Co., Ltd. has been committed to this research for several years, has repeatedly tried to overcome various difficulties. The cylinder is molded, the internal external fine grinding is used to clean the vibration. The centrifugal force is balanced by the centripetal force of axial movement, so that the problem of high-speed rotating balance of the drum is solved. The machine runs stably has high safety performance. The fine sealing device is used to prevent oil oil leakage the connecting parts of the rotating body the motor. Safety protection device is adopted to ensure that the rotating body will be separated the motor body when rotating at high speed. With careful design, the machine runs smoothly, has high safety performance, its filtering effect is better than other similar products. The oil filter can be said to be the terminal product of oil filtering equipment.

Other precautions:

1. The temperature of the filtered oil is about 70 ℃.

2. In practice, the longer the oil filter stops running, the better the filtration effect will be. The more uniform the oil-water mixture, the better the filtration effect.

3. When the new machine is tested, it is appropriate to filter about 10 kg oil at a time. After 3-4 times of filtration, it can return to the normal amount of 50-80 Jin. The test run should first use boiling water (boiling water) inside the oil filter to clean then repeatedly idle before commissioning.