Features of automatic oil residue filter

Features of automatic oil residue filter:

1. Continuous operation, no filter cloth filter, never stop change the filter medium. It will change the quality of the oil.

2. The production efficiency is high, the crude oil produced by 1 ton of rapeseed can be treated per hour.

3. The operation is simple convenient. The oil slag are automatically removed without manual labor. Change the quality of oil.

4. The treatment effect is excellent, the oil is clear bright, the oil residue is dried formed.

Supply processing capacity, good filtering effect of automatic oil residue separator.

Principle of horizontal screw oil residue separator: lyf2-150 horizontal screw centrifugal oil residue separator is based on the dynamic principle of liquid phase liquid phase in the high-speed rotating screw drum: the liquid phase moves to the lower position, the solid phase moves to the higher position. The variable diameter drum variable diameter spiral the speed difference between them are adopted, the high-speed centrifugal separation factor of 4800 rpm is used to make the solid particles solid In polar motion state, it separates rapidly along the changing diameter of spiral blade horizontal drum, with one side discharging oil the other side discharging slag.

Separator for filtering peanut oil residue

Practical operation of oil residue separator:

If the installation commissioning are completed everything is normal, the practical operation will be carried out: dephosphorization of crude oil with a certain temperature, mixing with appropriate proportion of hot brine, dephosphorization in stainless steel barrel, starting oil pump after circulation for several minutes, entering centrifuge for filtration, timely adjusting dephosphorization cycle time separation time according to material characteristics process requirements, so as to achieve better separation effect 。 In the actual use process, in case of emergency, it can be directly shut down for maintenance without cleaning.

Centrifugal oil filter makes use of the high-speed rotation of the centrifugal head to separate the oil, water impurities in the lubricating oil with different degrees of pollution under the action of different centrifugal forces. Safety protection device is adopted to ensure that the rotating body will be separated the motor body when rotating at high speed. With careful design, the machine runs smoothly, has high safety performance, its filtering effect is better than other similar products. The oil filter can be said to be the terminal product of oil filtering equipment

Separation system of oil residue separator:

It is composed of hollow shaft, cone end bearing box, screw propulsion shaft, left right bearing box, feed inlet, oil chamber, slag chamber, etc. the center of the hollow shaft adopts deep space processing technology, spiral linear blades are welded on the outer wall. There are 8 solid phases in the radial distribution of the cone end of the drum There are 18 overflow holes on the end face of the flange at the cylindrical end.

The machine also adopts synchronous gears with different tooth number pitch, which has high transmission efficiency, reliable operation compact structure, so as to ensure that the drum the screw propeller shaft can rotate at different speeds get stable rotation difference.