Contact person: Mr. Zheng
Mobile phone: 13761314297
Address: Yanyang Avenue, industrial concentration area, Liubao Town, Baoying County, Jiangsu Province
website: www.jszycdq.com
Teflon heating pipe is a new type of electric heater with strong corrosion resistance, which is used for heating various corrosive liquids. It has excellent aging resistance good winding performance, adopts low surface load (1.5w/cm2) design. The joint adopts fully enclosed acid-base proof, non heating section overheat safety protection system, which is completely customized according to the requirements of customers. In good condition, the heater is easy to burn down, has long service life, is fully sealed, does corrode, does leak electricity, has the grounding protection, is safe reliable, the applicable temperature is below 110 ° C, heating in very thick liquid, must be equipped with mixing. It is a reasonable choice of corrosion-resistant heater for electroplating, electrolysis, degreasing, pickling, electroless Ni-P, anodizing, aluminum plating, smelting, chemical industry, medicine, food other corrosive liquid-phase heating, condensation, evaporation, concentration, etc!
model
Adapt to environment technology
Pipe outer material
Unit surface load of pipe
~Service temperature
Usage time
Fluoroplastic electric heater (cmflon)
It is suitable for corrosive liquids such as strong acid alkali, with process temperature ≤ 105 ℃, no adhesion, no scaling, even surface heat dissipation
PFA / jacket PTFE / jacket
Stainless steel, titanium, iron, copper 1.5w/cm2
105℃
5000-10000h
Titanium (CMTI) electric heater
It is suitable for chromium plating, cupric acid plating, nickel plating, tunning, filling, oxidation tank, chromic acid anodizing, phosphating acid tin plating, etc
Ti Ti
6-4.5W/C㎡
140℃
5000-10000h
Stainless steel (cm316l) electric heater
It is suitable for liquid, oil other liquids with pH > 7-14
304、316L、1Cr18Ni9Ti
6-4.5W/C㎡
150℃
5000-10000h
Quartz electric heater
Suitable for use in anticorrosive liquids (except hydrofluoric acid)
quartz
1.5W/C㎡
200℃
5000-10000h
Fin type, dry burning tube external circulation hot air anti riot heater
It is suitable for heating in air, casting, embedding manufacturing heating module components
Stainless steel, 1Cr18Ni9Ti 10 ා steel
1-1.2W/C㎡
300℃
5000-10000h
explain
The shape of electric heating pipe is: U type, W type, I type, L type, coiled type plate type
Technical features:
1. Without far-infrared coating, it has good spectral radiation matching absorption characteristics, long-term use of radiation performance does deteriorate, high efficiency of electrothermal conversion. It can save about 30% energy than general heating elements.
2. High working temperature wide selection range. Among them, the ceramic cap package type, high temperature resistance up to 800 ℃.
3. Fast heating, small thermal inertia, high temperature resistance, corrosion resistance, good stability of thermochemical properties, long service life high insulation strength.
4. Pollution free, it is a clean type heater, which meets the requirements of modern production with high rhythm high quality, is suitable for household appliances with high sanitary requirements.
5. The design, manufacture installation are very convenient, economical safe.
Applications:
1. It is widely used as defrosting defrosting parts in refrigerator industry.
2. It is used in household appliances with high hygiene requirements, such as sterilization of disinfection cabinet, electric heater, copying over plastic equipment.
3. It is widely used in other industrial civil heating occasions, such as paint, tobacco, textile, food, agricultural grain, pharmaceutical, printing, paper making, carton, wood wood industry, which requires no pollution.